611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com each detector model contains: ? input impedance matching ? dc return ? rf bypass capacitor ? detector diode applications: ? transmitter monitoring ? radar equipment ? missile guidance systems ? input to low-noise amplifiers ? broadband or narrowband ecm receivers ? power and signal monitors ? doppler radar and beacon receivers ? matched units available for mult i-channel receivers, amplitude comparator systems and discriminators minimum(2) flatness nominal (4) frequency sensitivity vs typical (2) video standard optional range part (1) k frequency tss capacitance case case (ghz) number (mv/mw) (+/-db) (dbm) (pf) styles styles 0.1 - 1 acsp2517n 2000 0.28 -52 270 c3 c8,c15 0.1 - 2 acsp2538n 2000 0.3 -52 270 c3 c8,c15 0.5 - 2 acsp2501n 2000 0.3 -53 75 c3 c8,c15 1 - 4 acsp2630n 2000 0.3 -53 39 c3 c8,c15 2 - 4 acsp2502n 2000 0.2 -53 20 c3 c8,c15 2 - 6 acsp2546n 2000 0.3 -53 12 c3 c8,c15 1 - 6 acsp2656n 2000 0.5 -53 12 c3 c8,c15 4 - 8 acsp2503n 2000 0.3 -53 12 c3 c8,c15 0.5 - 12 acsp2658n 2000 1.3 -52 75 c3 c8,c15 1 - 12 acsp2762n 2000 1.5 -51 20 c3 c8,c15 2 - 12 acsp2507n 2000 1.1 -53 12 c3 c8,c15 8 - 12 acsp2504n 2100 0.4 -53 12 c3 c8,c15,c32 0.5 - 18 acsp2572n 1800 1.5 -52 12 c3 c15,c32 1 - 18 acsp2759n 1500 1.25 -50 20 c3 c15,c32 2 - 18 acsp2506n 1800 1.5 -51 12 c3 c15,c32 6 - 18 acsp2523n 1800 1.0 -51 12 c3 c15,c32 12 - 18 acsp2505n 2000 0.6 -52 12 c3 c15,c32 notes: 1) standard output polarity is negative. if positive output is required, substitute ?p? for ?n? in part number. 2) measured into an open circuit load (>10k ohm). 3) vswr measured at or below -20dbm input power level. 4) video capacitance is used for rf bypass. this value can be changed if required for video response time or other considerati ons. contact the factory if value other than those shown are needed. 5) standard bias is 100 microamps. 6) zero bias schottky ve rsions are available for most of listed biased schottky models with onl y minor differences in specifica tions. a. the zero bias schottky has an impedance of several thousand ohms. b. zero bias schottky detecto rs exhibit less sensitive tss due to the high diode impedance (typically a 3db reduction). c. the temperature performance of the zero bias schottky is poor when operating at low input power levels. this difference becomes small at high levels (above 0dbm input power). the part number of zero bias versions includes a ?z? following the polarity indicator. the acsp series of high sensitivity det ectors exhibit super ior electrical and environmental reliability characteristics. they contain hermetically sealed modules, internal rf matching, dc re turn, and rf bypass capacitor. in addition, the video port is protected from static or transient voltages. this feature prevents damage due to handling (usually static) or system video transients. models may be chosen for broadband rf performance or for optimized narrow bands. biased coaxial schottky detectors
611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com environmental specifications: screening : mil-e-5400, mil-std-202, mil-e-16400 standard screening : operating temp: -65c to +125c internal visual per mil-std-883, method 2017 storage temp: -65c to +150c temperature cycle: -65c to +100c, 10 cycles humidity: mil-std-202f, m103, cond b op tional high-rel screening (ref mil-prf-38534) : shock: mil-std-202f, m213, cond b internal visual per mil-std-883, method 2017 altitude: mil-std-202f, m105, cond b stabilization bake per mil-std-883, method 1008 vibration : mil-std-202f, m204, cond b temperature cycle per mil-std-883, method 1010 thermal shock: mil-std-202f, m107, cond a c onstant acceleration per mil-std-883, method 2001 temperature cycle: mil-std-202f, m105c, cond d burn-in per mil-std-883, method 1015 maximum input power: +20dbm leak test per mil-std-883, method 1014 external visual per mil-std-883, method 2009 case style c3 case style c8 case style c15 case style c32 part number ordering information: example: acsp2503nzc3x20 acsp2503: biased coaxial schottky detector, 4 - 8ghz n: negative output polarity z: zero bias version (omit for biased version) c3: package type x: no video protection (omit for inclusion of video protection) 20: 20pf custom output ca pacitance (omit for standard value) spb-0205 ?0.312 1.320.020 sma male (input) sma female (output) 2.800.020 bnc female (output) ?0.625 type-n male (input) bnc female (output) sma male (input) 2.00 0.43 0.42 ?0.500 ?0.312 sma female (output) sma male (input) 1.160.020
|
